TruePeakDetector¶

streaming mode | Audio Problems category

Inputs¶

signal (vector_real) - the input audio signal

Outputs¶

output (vector_real) - the processed signal

peakLocations (vector_real) - the peak locations in the ouput signal

Parameters¶

blockDC (bool ∈ {true, false}, default = false) :
flag to activate the optional DC blocker

emphasise (bool ∈ {true, false}, default = false) :
flag to activate the optional emphasis filter

oversamplingFactor (integer ∈ [1, ∞), default = 4) :
times the signal is oversapled

quality (integer ∈ [0, 4], default = 1) :
type of interpolation applied (see libresmple)

sampleRate (real ∈ (0, ∞), default = 44100) :
the sampling rate of the audio signal [Hz]

threshold (real ∈ (-∞, ∞), default = -0.0002) :
threshold to detect peaks [dB]

version (integer ∈ {2, 4}, default = 4) :
algorithm version

Description¶

This algorithm implements a “true-peak” level meter for clipping detection. According to the ITU-R recommendations, “true-peak” values overcoming the full-scale range are potential sources of “clipping in subsequent processes, such as within particular D/A converters or during sample-rate conversion”. The ITU-R BS.1770-4[1] (by default) and the ITU-R BS.1770-2[2] signal-flows can be used. Go to the references for information about the differences. Only the peaks (if any) exceeding the configurable amplitude threshold are returned. Note: the parameters ‘blockDC’ and ‘emphasise’ work only when ‘version’ is set to 2.

References:: [1] Series, B. S. (2011). Recommendation ITU-R BS.1770-4. Algorithms to measure audio programme loudness and true-peak audio level, https://www.itu.int/dms_pubrec/itu-r/rec/bs/R-REC-BS.1770-4-201510-I!!PDF-E.pdf [2] Series, B. S. (2011). Recommendation ITU-R BS.1770-2. Algorithms to measure audio programme loudness and true-peak audio level, https://www.itu.int/dms_pubrec/itu-r/rec/bs/R-REC-BS.1770-2-201103-S!!PDF-E.pdf

Source code¶

C++ source code

C++ header file